110W Semi-Flexible Solar Panel

Product Details:

Description
Click the Distributors menu below to see which distributors stock this product.

Are you interested in purchasing a large quantity? Contact us directly.
The 110W SemiFlex Solar Panel brings together PowerFilm’s 30 years in the solar industry with custom solutions using Maxeon-designed monocrystalline (c-Si) solar cells.
Pair your 110W panel with the 10A Charge Controller to ensure safe charging.

Leveraging our deep expertise in custom encapsulations, varied substrates, and total electronics, the 110W Solar Panel provides unsurpassed efficiency, delivering more power to your system.

What's included:

110W Solar Panel (R3-32F18.9V)

15 ft. Extension Cord with O-ring Connectors (RA-11)

Best uses:

12V battery charging

Trolling motor, car, RV, lawnmower, ATV battery maintenance

Benefits:

Rugged Encapsulation - protection from hot, humid environments, icing, water immersion, and saltwater spray.

Lightweight - weighs less than 6lbs.

High Efficiency - made with top-of-the-line Maxeon crystalline solar cells.

Whole-Cell Design - reduces induced cracks and defects and maximizes power.

Cost-Effective - due to an ever-increasing scale, the cost of crystalline solar panels continues to drop, making it an affordable solar technology.
Important Notes

Pair your 110W Solar Panel with the 10A Charge Controller to ensure safe charging.

If the panel is wet, wipe it down before storing it in a cool, dry environment.

All connections must be solar positive (red) to battery positive and solar negative (black or blue) to battery negative. Reversing can damage the solar panel. Consult your battery manufacturer if you have questions about the specifications of your battery.

Operating Voltage and Current are typical values when tested under load at AM 1.5 lighting conditions. Power performance may vary due to temperature, light spectrum, angle to the sun, and other effects (minimum 95% rated when new).
Specifications
Power:
- Rated Voltage at Pmax: 19.3V
- Rated Current at Pmax: 5.8A
- Open Circuit Voltage: 23.5V
- Short Circuit Current: 6.3A
*Typical specs measured at STC. Contact PowerFilm for maximum specs and tolerances to use in custom designs or complex applications.

Physical:
- Dimensions
  - 44.5 x 20.9 x 0.1 (in) / 1,130.3 x 530.9 x 2.5 (mm)
  - Black fiberglass backing
- Weight
  - 5.5lb / 2.5kg
Environmental:
- Temperature Coefficient
  - Voltage: -0.236%/ºC
  - Power: -0.27%/ºC
  - Current: 0.058%/ºC
- Temperature Range
  - Operating temperature -40°C to 85°C
  - Storage temperature -40°C to 85°C
How To Charge
1. Set the panel on the ground (or another surface) with the solar side facing up and pointing towards the sun.
2. Connect the solar panel to a SunSaver-10 (CC12V-10) and the charge controller to a 12V battery using the included 15 ft. Extension Cord with O-ring Connectors (RA-11) for charging and power storage.
3. Use the grommets on each corner and a tie cord to secure the panel in place, reducing the risk of loss or damage from high winds.
4. Connect the appropriate accessory and cable for the type of device you will be charging.
Electronics:
1. Connect the 12V Female Car Charger Adapter (RA-2) (not included) to the panel.
2. Use your own USB car charger adapter to connect your device to the RA-2, or use a 2.4A Dual USB 12V Adapter (RA-14B) (not included) to charge USB electronics.
Selecting a battery:
- SemiFlex Solar Panels are compatible with all 12V flooded lead-acid and AGM batteries (10Ah or larger are recommended), as well as many LiFePO4 and Li-ion batteries (consult the battery manufacturer to confirm solar compatibility).
Accessories
- 10A Charge Controller (CC12V-10)
- 15 ft. Extension Cord with Alligator Clips (RA-8) for quick temporary connections to batteries.
- 2.4A Dual USB 12V Adapter (RA-14B) use with the 12V Female Car Charger Adapter (RA-2) to charge USB devices
- 15 ft. Extension Cord (RA-7)
- Male 12V Car Charger Adapter (RA-1) charge your vehicle’s battery through the 12V power port. Consult your vehicle’s owner’s manual for more information.
- Daisy Chain Cable (RA-6-HD) - connect a second panel (must be the same voltage) in parallel, generating up to 20A (if necessary, use a charge controller appropriate for the combined panel output).
- Adventure Accessory Kit (AK-2) includes:
  - Daisy Chain Cable (RA-6-HD)
  - 15 ft. Extension Cord with Alligator Clips (RA-8)
  - 12V Male Car Charger Adapter (RA-1)
Distributors
Resources