100 Watt Solar Panel (RP-32F16.6V)
The 100W Solar Panel brings together PowerFilm’s 30 years in the solar industry with custom solutions using SunPower-designed monocrystalline (c-Si) solar cells.
Pair your 100 Watt panel with the 10A Charge Controller to ensure safe charging.
Leveraging our deep expertise in custom encapsulations, varied substrates, and total electronics, The Soltronix 100 Watt Solar Panel provides unsurpassed efficiency delivering more power to your system.
What's included:
-
100W Solar Panel (RP-32F16.6V)
Best uses:
-
12V battery charging
-
Trolling motor, smartphone, fish finder, GPS, car, RV, lawnmower, ATV
-
Camp lighting
Benefits:
-
Rugged Encapsulation - protection from hot, humid environments, icing, water immersion, and saltwater spray.
-
Lightweight - weighs less than 6lbs
-
High Efficiency - made with top of the line Sunpower crystalline solar cells
-
Whole-Cell Design - reduces induced cracks, defects, and maximizes power
-
Cost-Effective - due to an ever-increasing scale, the cost of crystalline solar panels continues to drop making it an affordable solar technology.
Suggested accessories:
-
15 ft. Extension Cord with Alligator Clips (RA-8) for quick temporary connections to batteries.
-
2.4A Dual USB 12V Adapter (RA-14B) use with the 12V Female Car Charger Adapter (RA-2) to charge USB devices
-
Male 12V Car Charger Adapter (RA-1) - charge your vehicle’s battery through the 12V power port. Consult your vehicle’s owner’s manual for more information.
-
Daisy Chain Cable (RA-6-HD) - connect a second panel (must be the same voltage) in parallel generating up to 20A (if necessary, use charge controller appropriate for the combined panel output).
-
Adventure Accessory Kit (AK-2) includes:
-
Daisy Chain Cable (RA-6-HD)
-
15 ft. Extension Cord with Alligator Clips (RA-8)
-
12V Male Car Charger Adapter (RA-1)
-
Additional Resources


Pair your 100 Watt Solar Panel with the 10A Charge Controller to ensure safe charging.
If the panel is wet, wipe it down before storing it in a cool dry environment.
All connections must be solar positive (red) to battery positive and solar negative (black or blue) to battery negative. Reversing can damage the solar panel. Consult your battery manufacturer if you have questions about the specifications of your battery.
Power:
-
Rated Voltage at Pmax: 18.1V
-
Rated Current at Pmax: 5.3A
-
Open Circuit Voltage: 21.8V
-
Short Circuit Current: 5.7A
Physical:
-
Dimensions
-
44.5 x 20.9 x 0.1 (in) / 1,130.3 x 530.9 x 2.5 (mm)
-
Black fiberglass backing
-
-
Weight
-
5.5lb / 2.5kg
-
Environmental:
-
Temperature Coefficient
-
Voltage: -1.8mV/C
-
Power: -0.32%/C
-
-
Temperature Range
-
Operating temperature -40C to 60C
-
Storage temperature -40C to 85C
-
Operating Voltage and Current are typical values when tested under load at AM 1.5 lighting conditions. Power performance may vary due to temperature, light spectrum, angle to the sun, and other effects (minimum 95% rated when new).
-
Set the panel on the ground (or other surface) with the solar side facing up and pointed towards the sun.
-
Connect the solar panel to a SunSaver-10 (CC12V-10) to your solar panel and the charge controller to a 12V battery using the included 15 ft. Extension Cord with O-ring Connectors (RA-11) for charging and power storage.
-
Use the grommets on each of the corners and a tie cord to hold the panel in place and reduce loss or damage from high winds.
-
Connect the appropriate accessory and cable for the type of device you will be charging.
Electronics:
-
Connect the 12V Female Car Charger Adapter (RA-2) (not included) to the panel.
-
Use your own USB car charger adapter to connect your device to the RA-2 or use a 2.4A Dual USB 12V Adapter (RA-14B) (not included) to charge USB electronics.
Selecting a battery:
-
Soltronix Solar Panels are compatible with all 12V flooded lead-acid and AGM batteries (10Ah or larger are recommended) and many LiFePO and Li-ion batteries (consult battery manufacturer to confirm solar compatibility).