 |
PowerFilm® Limited Warranty
This warranty supersedes all warranty statements
dated prior to June 23, 2005. PowerFilm® integrated
solar modules are warranted to be free from defects
in materials and workmanship and to provide at least
80% of rated minimum power for a period indicated
in the PowerFilm Warranty Information Table below.
The duration of the Limited Warranty is from the
date of initial purchase from PowerFilm Inc. The foregoing warranty does not apply to
any modules which have been subject to misuse, unauthorized
modifications, neglect, improper testing, attempts
to repair, or by accident, fire or other hazard.
PowerFilm's sole obligation and liability for modules
failing to comply with this warranty shall be, at
PowerFilm's choice, either to supply replacement modules
or to credit the amount due for such nonconforming
modules, provided that the warranty procedures have
been followed. For purposes of clarity, the module
warranty is only on the modules shipped as is by
PowerFilm. The warranty for modules that have been laminated
is the sole responsibility of the party doing the
lamination. If a party other than PowerFilm laminates
a module, PowerFilm's module warranty is voided once
the module has been laminated.
PowerFilm Warranty Information Table
Disclaimer
of Warranties. EXCEPT AS EXPRESSLY SET
FORTH IN THIS AGREEMENT THE PRODUCTS ARE PROVIDED
ON AN “AS IS” BASIS AND ITFT MAKES NO
WARRANTY IN CONNECTION WITH THE SUBJECT MATTER OF
THIS AGREEMENT AND HEREBY DISCLAIMS ANY AND ALL
IMPLIED OR STATUTORY WARRANTIES, INCLUDING ALL IMPLIED
WARRANTIES OF TITLE, NON-INFRINGEMENT, QUIET ENJOYMENT,
ACCURACY OF DATA, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR USE OR PURPOSE REGARDING SUCH SUBJECT
MATTER. To the extent that a party may not, as a
matter of applicable law, disclaim any implied warranty,
the scope and duration of such warranty shall be
the minimum permitted under such law.
No Warranty Pass-Through. PowerFilm grants no
warranty pass-through for any PowerFilm product. Customer
shall not pass through to its customers or any other
third party the warranties made by PowerFilm and will
expressly indicate to its customers that they must
look solely to them (not PowerFilm) in connection with
any problems, warranty claims or other matters arising
in relation to the modules.
Warranty Claims Process. In the event that
a warranty claim is made by customer to PowerFilm, PowerFilm
may direct customer to: (i) immediately return the
affected modules to PowerFilm for further inspection,
testing or other procedures; or (ii) destroy the
affected modules. Any direction to return the affected
modules to PowerFilm shall be accomplished by PowerFilm issuing
a “Return Authorization” for such affected
modules.
(a) To obtain a return authorization
number, customer to fax Return Authorization request,
with product name and quantity, to the PowerFilm Accounting
Department at 515-292-1922.
(b) Upon issuance of such Return
Authorization by PowerFilm, customer shall promptly ship
such materials together with all relevant data from
the customer to the designated facility, freight
and insurance prepaid, in the original shipping
container or an equivalently protective container.
Customer shall be entitled to receive replacement
products, new substitute products for prior products,
or credit, such choice to be determined solely by
PowerFilm, if and only if manufacturing defects in the
returned products: (x) actually exist as indicated
in the customer warranty claim; and (y) such defects
are not attributable to customer’s own misuse,
unauthorized modifications, neglect, improper testing,
attempts to repair, or by accident, fire or other
hazard while such modules were in the possession
or control of customer. If no warranty claim is
granted for the returned products, PowerFilm shall return
the products to customer, with customer to pay the
shipping expense.
(c) The product for the warranty
claim is to be shipped, freight pre-paid by customer,
with the Return Authorization number, the original
proof of purchase from Iowa Thin Film Technologies
(evidence that the product is within the warranty
period), and a clear description of the product
defect, use, and use environment to:
PowerFilm
Warranty Service
2337 230th Street
Ames, IA 50014 USA
Phone: 515-292-7606
PowerFilm
shall then evaluate the warranty claim using the
process indicated above.
Soltronix Limited Warranty
This warranty supersedes all warranty statements
dated prior to June 23, 2005. PowerFilm warrants the
Soltronix® HR-1 solar-recharged headphone radio
to be free from defects in materials and workmanship
for a period of 90 days from the date of purchase.
PowerFilm warrants the integrated PowerFilm solar module
to be free from defects in materials and workmanship
for a period of three (3) years from the date of
purchase. If after using the described warranty
claims process and concluding that the product is
defective and covered by the limited warranty, PowerFilm,
at its option, will repair or replace the unit,
free of charge. The foregoing warranty does not
apply to any unit which has been subject to misuse,
unauthorized modifications, neglect, attempts to
repair, or by accident, fire or other hazard.
Disclaimer of Warranties. EXCEPT AS EXPRESSLY
SET FORTH IN THIS AGREEMENT THE PRODUCTS ARE PROVIDED
ON AN “AS IS” BASIS AND ITFT MAKES NO
WARRANTY IN CONNECTION WITH THE SUBJECT MATTER OF
THIS AGREEMENT AND HEREBY DISCLAIMS ANY AND ALL
IMPLIED OR STATUTORY WARRANTIES, INCLUDING ALL IMPLIED
WARRANTIES OF TITLE, NON-INFRINGEMENT, QUIET ENJOYMENT,
ACCURACY OF DATA, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR USE OR PURPOSE REGARDING SUCH SUBJECT
MATTER. To the extent that a party may not, as a
matter of applicable law, disclaim any implied warranty,
the scope and duration of such warranty shall be
the minimum permitted under such law.
No Warranty Pass-Through. PowerFilm grants no
warranty pass-through for any PowerFilm product to customer.
Customer shall not pass through to its customers
or any other third party the warranties made by
PowerFilm and will expressly indicate to its customers
that they must look solely to them (not PowerFilm) in
connection with any problems, warranty claims or
other matters arising in relation to the modules.
1.2 Warranty Claims Process. In
the event that a warranty claim is made by customer
TO PowerFilm, PowerFilm may direct customer to: (i) immediately
return the affected modules to PowerFilm for further
inspection, testing or other procedures; or (ii)
destroy the affected modules. Any direction to return
the affected modules to PowerFilm shall be accomplished
by PowerFilm issuing a “Return Authorization”
for such affected modules.
(a) To obtain a return authorization number, customer
to fax Return Authorization request, with product
name and quantity, to the PowerFilm Accounting Department
at 515-292-1922.
(b) Upon issuance of such Return
Authorization by PowerFilm, customer shall promptly
ship such materials together with all relevant
data from the customer to the designated facility,
freight and insurance prepaid, in the original
shipping container or an equivalently protective
container. Customer shall be entitled to receive
replacement products, new substitute products
for prior products, or credit, such choice to
be determined solely by PowerFilm, if and only if manufacturing
defects in the returned products: (x) actually
exist as indicated in the customer warranty claim;
and (y) such defects are not attributable to customer’s
own misuse, unauthorized modifications, neglect,
improper testing, attempts to repair, or by accident,
fire or other hazard while such modules were in
the possession or control of customer. If no warranty
claim is granted for the returned products, PowerFilm
shall return the products to customer, with customer
to pay the shipping expense.
(c) The product for the warranty
claim is to be shipped, freight pre-paid by customer,
with the Return Authorization number, the original
proof of purchase from Iowa Thin Film Technologies
(evidence that the product is within the warranty
period), and a clear description of the product
defect, use, and use environment to:
PowerFilm
Warranty Service
2337 230th Street
Ames, IA 50014 USA
Phone: 515-292-7606
PowerFilm
shall then evaluate the warranty claim using the
process indicated above.
|
|
